In these uncertain times we are pleased to advise that RaceShocks remains fully opperational as the business runs from premises at home.
We are still able to collect, service and sell items. Please contact us with any queries.
£2,215.00 + VAT
Nitron by Meteor NTA – The Autograss damper.
The Nitron NTA Class 7 is based around Nitron’s proven Pro 46mm suspension kit. Development of the Nitron damper range has not stopped. We have continued to improve the NTR1 and NTR3 over the last 12 months and these new Nitron by Meteor NTA specification dampers are the successful result.
Using the past 11 years of successful competition knowledge we have again improved on the suspension dynamics for the Autograss market.
Specifically valved for the rear engined Class 7 cars the damper still retains a wide range of adjustment.
Front dampers ar 16″ long with a 24″ hose.
Rear Dampers are 23.5″ with a 16″ hose.
All hoses are mounted with a swivel banjo as standard providing simple mounting options.
The front dampers are unique in that the bodies are 40mm but use a 16mm shaft for increased strength. The rear dampers are 46mm and 16mm shaft. From the outside the units will look the same but internally they have been re-engineered. The reason behind the noticeable difference from the standard Nitron to the Meteor version is due to the internal valving and those increased shaft sizes. Allowing us to control the fluid flow more efficiently, making a noticeable difference to the handling performance and ride quality. With true 3 way adjustment and complete separation between the adjustment means that no longer will adjusting the rebound affect the forces seen on the compression side of the curve. We have seen many dampers where adjusting one setting affects another significantly but without a dyno you would not know it.
This kit is designed for serious race use and as such incorporates high and low speed bump control valves for further chassis fine-tuning. By adjusting either bump or rebound damping the damping ratio can be adjusted. For example the high speed damping can be kept soft so the car is not thrown by large holes whilst not compromising body control in the transient cornering phase (turn in, applying power). This low speed control is more concerned with grip off the line and weight transition on corner entry. The NTA remote reservoir kit provides simple fitting as included as standard are our swivel banjo fittings to both damper and canister. No restrictions to the angle required for installation in the car. Other benefits of remote reservoirs are higher fade resistance due to a higher oil volume, plus a larger surface area to radiate the heat to the atmosphere.
Custom spring and valving requirements can be specified.
We can also help with a recommended set up starting point.
Kit includes 2 front dampers and 2 rear dampers with spacers and canister mounting rubbers.