TRACTIVE SUSPENSION ROAD and TRACK LINE
TracTive Road and Track Line products are developed for dedicated sporty vehicles that will benefit from a more performance-oriented suspension set-up.
TracTive Road-Track ACE technology (Activity Controlled Electronic) creates the ability to have multiple set-ups ranging from compliant for low grip situations to a maximum controlled for sporting events. These settings can be available to the driver with one touch of a button and can be pre-set to 5 memory positions.
The motion of the vehicle is measured using the internal sensors of the control unit. From the motion of the vehicle, the required damping per individual corner is determined and set. The corresponding response time is 6-10ms. In this time of 6-10ms, the damper stiffness can be set fully-proportional from full stiff to full soft.
R-ACE takes advantage of the full functionality of the ACE technology. On top of the TracTive ACE technology, conventional compression high- and low-speed adjusters are added. Using these compression adjusters, it’s possible to fine-tune the damper characteristics. R-ACE, as the name suggests, is best suited for race applications.
The compression adjusters can be located in remote reservoirs, piggyback reservoirs or even inline reservoirs.
TracTive One-Way dampers are based on the knowledge obtained while developing the TracTive ACE sets. One-Way dampers are build using the same high-end components as the TracTive ACE dampers. One-Way dampers are executed with 20 clicks, which will adjust both rebound and compression damping.
Tractive Three-Way dampers give the user the ability to independently adjust rebound damping, low-speed compression damping and high-speed compression damping.
The TracTive Road Track line dampers come with the following specifications:
- 43mm inverted McPherson struts where applicable
- 38mm piston for inverted and specific rear shocks
- 46mm piston for Multilink suspension and similar
- 16mm spindle for maximum strength and rigidity
- Damper made for fitment of Tractive uni-ball top mounts where applicable
- Racing springs for selected applications with customizable spring rates
- Steel inverted McPherson struts with adjustable 7075 aluminium mounting brackets
- 7075 aluminium ARB where applicable
- Adjustable top mounts on inverted McPherson struts
- Solid top mounts for multilink applications